[Dibico Project Journal - Part 7]

[Back to part 6]

..[Part 1][Part 2][Part 3][Part 4] [Part 5][Part 6][Part 7][Part 8] [Part 9][Part 10][Part 11][Part 12] [Part 13][Part 14][Part 15][Part 16] [Part 17][Part 18][Part 19][Part 20] [Part 21][Part 22][Part 23][Part 24 Tuning]


trike
This is your new home Dibico!

After month of hard and boring work to make the move possible I was now finally able to continue with the construction work. The first thing that I put my hands on was the drive train. I bought a yoke and started to set the things together.

trike
Setting the drive shaft together.
trike
Welded together.
trike
This is how I solved the problem with fixating the seat.
trike
And at the back as well.
trike
Setting the drive shaft together.
trike
Mounting the link-arm.
trike
Assembled from the front.
trike
Milling some holes.
trike
Milling bigger holes.
trike
Welded link-arm.
trike
It fits.
trike
Milling a larger hole.
trike
Putting it all together.
trike
It fits.

If you like or dislike the project please leave a [comment] [See part 8]


Watch my videos on youtube:

[Hampus Trike-Videos]>