[Dibico Project Journal - Part 19]

[Back to part 18]

..[Part 1][Part 2][Part 3][Part 4] [Part 5][Part 6][Part 7][Part 8] [Part 9][Part 10][Part 11][Part 12] [Part 13][Part 14][Part 15][Part 16] [Part 17][Part 18][Part 19][Part 20] [Part 21][Part 22][Part 23]


trike
I decided to redesign this part located underneath the engine, before it was welded to the frame but i thought it would be better to have it mounted with bolts.
trike
Third REALLY HARD decision to make was to cut away and change the rear-top-main tube running over the engine. I found out that the bend over the engine did not match with the left tube. You could actually see it with your eyes and that did not amuse me!
trike
There you go, i did manage to get all the bends right this time. And i was really lucke because this was my last tube in that dimension:D
trike
Tadaaa! Back on track:D
trike
I did a lot of measuring with these custom made wood stands. they worked out really well.
trike
Now it was time for the fun part. Every tube and fastener was lined up and i was pleased, so now it was time to make the final weld on the inside of every place that i had not reached before.
trike
trike
Pulling the front end to pieces preparing it for painting.
trike
Grind, grind, grind.....
trike
More grinding.
trike
Builing a stand to prepare for painting.
trike
I have built a lot of parts for this bike and now it is time to paint them.
trike
Hanging them on individual hooks.
trike
More parts.
trike
I am ready to rock´n´roll
If you like or dislike the project please leave a [comment] [See part 20]

Watch my videos on youtube:

[Hampus Trike-Videos]